З 18.12.23 магазин в м.Дніпро за адресою вул.Новокримська 58 не працює.
Однак, наш інтернет-магазин відкритий для вас 24/7.
Усі місцеві замовлення можуть бути відправлені кур'єрськими службами.
Web Speech API is not supported by this browser. Install Google Chrome.
Voice input also works in Safari, Yandex, as well as mobile browsers Huawei, Opera and Samsung..
"Corn" face milling cutter for CNC machines.
The cutter for PCB is intended primarily for milling printed circuit boards along the contour, however, the scope of such cutters is much wider: processing fiberglass and textolite, hard wood, laminated plastic, aluminum, composite materials.
The surface of the cutter is made in the form of pyramids, the sharp edges of which are cutting edges.
It should be noted that due to the lack of chip removal, the processing speed is low. But unlike multi-line cutters, "corn" can handle almost any material, including abrasive ones. Strongly crush the chips, it is good to use for lined materials, for example, for foil-coated fiberglass, both one-sided and double-sided.
Another advantage is that this cutter does not pull out the cut parts.
Tungsten carbide cutting edge.
A protective titanium nitride (TiN) coating is applied to the cutting edge for increased abrasion resistance.
RCF type: the end of the cutter resembles a fishtail. Provides a smooth, flat surface when face cut after machining.
Specifications:
working part diameter: 0.7 mm
shank diameter: 3.175 mm
cutting length: 3-4 mm
total cutter length: 38 mm
cutter type: RCF
material: tungsten carbide
coating: titanium nitride (TiN)
hardness: HRC 55
The service life of the cutter depends on the quality of the equipment used. Long tool life can be achieved using a well maintained CNC machine. The machine must be equipped with good holding feet.
Leave your feedback or ask a question
Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав
unknown