З 18.12.23 магазин в м.Дніпро за адресою вул.Новокримська 58 не працює.
Однак, наш інтернет-магазин відкритий для вас 24/7.
Усі місцеві замовлення можуть бути відправлені кур'єрськими службами.
Web Speech API is not supported by this browser. Install Google Chrome.
Voice input also works in Safari, Yandex, as well as mobile browsers Huawei, Opera and Samsung..
Charging module for one Li-Ion or LiFePO4 battery, assembled on a TP5000 microchip. The battery is charged using the "constant current, constant voltage" algorithm. The main advantage of TP5000 from TP4056 is the use of a switching voltage converter, this increases the efficiency of the charger.
Specifications:
Supply voltage DC 4.5-9V, it is recommended not to exceed 7V
End charge voltage: DC 4.2V/3.6V (default 4.2V)
to set the voltage to 3.6V, you need to remove the “F” jumper on the board.
Charging current up to 2A, default 1A
to change the charging current, you need to change the value of the resistors signed on the “SANYA” board.
With a charging current of more than 1A, the board must be installed on an additional heatsink
Indication of charging process - red LED is on/green LED is blinking
В описании: "для установки напряжения 3.6V нужно запаять перемычку “F” на плате". На самом деле наоборот, запаянная перемычка дает 4,2 вольта на выходе, а незапаянная 3,6 вольта.
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Денис - Днепр
unknown
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
