З 18.12.23 магазин в м.Дніпро за адресою вул.Новокримська 58 не працює.
Однак, наш інтернет-магазин відкритий для вас 24/7.
Усі місцеві замовлення можуть бути відправлені кур'єрськими службами.
Web Speech API is not supported by this browser. Install Google Chrome.
Voice input also works in Safari, Yandex, as well as mobile browsers Huawei, Opera and Samsung..
In winter, indoor air humidity is much lower than the norm, since heaters and batteries are turned on. The optimum air humidity for a person should be at least 50%. A small and stylish USB humidifier will help you increase the humidity if necessary, whether it be a living room, bedroom or workplace. Thanks to the donut, there is no need to buy bulky and expensive humidifiers.
The ultrasonic humidifier is easy to use. To turn it on, just connect it to any USB port and place it in a container with water or any other liquid. The humidifier will do the rest by itself, it begins to "evaporate steam" by acting on the liquid with ultrasonic waves. The humidifier can work continuously for 3 or 6 hours, depending on which mode you select.
The small device is shaped like an ordinary bagel. You can easily take it with you to work or travel, since its compact size allows it. A miniature air humidifier is relevant for office workers, as well as for those who are often on business trips or travel and are forced to be in an unusual environment with dry air.
It has long been proven that the optimal humidity in the room (from 40 to 70%), where you are, directly affects your well-being and, as a result, your performance. Too dry air causes fatigue, fatigue, irritability, drowsiness and does not contribute to efficient work. A portable humidifier floats on the surface of the water because it does not have a container for liquid and a certain volume, it can be in any container of water, from a cup to a pool.
Key features:
Power supply: DC 5V 300mA from USB port
Power: 1.5W ±0.5W
Productivity: 30 ml/hour
Water temperature: 10-50°C
Degree of protection: IP68
Colour: white
Size: diameter 5 cm, height 2cm
Weight: ~ 30 g
Material: ABS plastic
Pay attention! During the operation of the ultrasonic emitter, cavitation air bubbles form under the bottom in the center of the emitter, which is a normal process of its operation. When the bubble is quite large, it can cut off the water supply to the emitter and the water shortage protection will work and the device will turn off. In order for the bubble to float to the surface on its own, you need to position the device at a slight angle. Also, during the first and repeated starts, after drying the device, you need to wait a little before starting until the filter of the device gets wet enough.
Leave your feedback or ask a question
Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Денис - Днепр
unknown
.jpg)
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
